Tinker Air Force Base visitor access requires planning around entry procedures and gate information. The base is in Oklahoma, and its Visitor Control Center is at the Tinker Gate on Air Depot Boulevard. From a room at this Guthrie motel, the drive to Tinker Air Force Base takes about 42 minutes by car.
- Visitor Control Center: Tinker Gate on Air Depot Boulevard
- Tinker Gate: at I-40 and South Air Depot Boulevard
- Weekend visitor passes: available at the gates
Understanding the route to Tinker
The Visitor Control Center is at the Tinker Gate on Air Depot Boulevard, at I-40 and South Air Depot Boulevard. Enter that location as your destination when planning the drive.
The base provides live gate conditions by gate and direction, plus Oklahoma Department of Transportation camera views at I-40 and Air Depot and I-40 and Eaker Gate.
Who can enter the installation
Entry depends on your authorization and the procedures in effect when you arrive. Visitors who need passes on weekends can obtain them at the gates; the Visitor Control Center is closed on federal holidays.
Traffic, weather and construction information can change without notice, so check the official site before you go.
Identification and gate checks
Follow instructions from base security personnel during entry checks. The Visitor Control Center is at the Tinker Gate, not at a separate destination elsewhere on the installation.
The Tinker Gate and Hruskocy Gate, at I-40 and Industrial Boulevard, are both open 24 hours a day. Hruskocy is a preferred gate for vehicles towing trailers; gate availability can change without prior notice.
Planning the drive from Guthrie
Set your destination to the Visitor Control Center at the Tinker Gate, then check gate conditions before leaving. Tinker’s traffic page includes gate-by-gate conditions and camera views at two I-40 locations.
If your plans include getting around Guthrie, local transport options can help you plan the town portion of your trip: getting around Guthrie.
For airport-to-town planning, the drive between Will Rogers World Airport and Guthrie is another part of the route to consider.
The Will Rogers World Airport to Guthrie route covers that connection.
Options if you are visiting nearby rather than entering
If your plans do not require installation access, stay on public roads and follow posted traffic directions around the base. A gate being open does not guarantee entry without the required authorization.
For a trailer, use the Hruskocy Gate as the preferred approach when appropriate. Check current gate conditions before choosing your route.
FAQs
Where is the Tinker Air Force Base Visitor Control Center?
It is at the Tinker Gate on Air Depot Boulevard, at I-40 and South Air Depot Boulevard.
Can visitors get passes on weekends?
Visitors who need passes on weekends can obtain them at the gates. The Visitor Control Center is closed on federal holidays.
Which gate is preferred for vehicles towing trailers?
The Hruskocy Gate at I-40 and Industrial Boulevard is a preferred gate for vehicles towing trailers.